Amifostine (WR-2721), CAS 20537-88-6, is an organophosphorothioate raw material also known as ethiofos. The white to off-white powder is quoted with its hydration state, assay basis and impurity limits specified for the intended pharmaceutical process. The anhydrous identity is distinguished from amifostine trihydrate.
Amifostine (WR-2721) CAS 20537-88-6
- CAS: 20537-88-6
- Synonyms: Amifostine; WR-2721; Ethiofos
- Molecular Formula: C₅H₁₅N₂O₃PS
- Grade: Chemical form, assay basis and impurity limits specified for the quoted grade; any pharmacopoeial requirement identified with its applicable edition.
- Package: Tightly closed packaging with protection from light and moisture; pack size and storage and transport conditions specified for the quoted form.
Product Description
Chemical identity and hydration state
Amifostine, WR-2721 and ethiofos identify the same parent compound, CAS 20537-88-6, with molecular formula C₅H₁₅N₂O₃PS and molecular weight 214.22 g/mol. Amifostine trihydrate is a different hydration form, CAS 112901-68-5, with formula C₅H₁₅N₂O₃PS·3H₂O and molecular weight 268.27 g/mol. The quotation identifies the supplied form so that the CAS, formula and specification describe the same material.
Hydration affects the interpretation of an assay result. An assay reported as the parent compound on an as-is basis uses the total weighed sample mass, including its water, as the denominator. A water-corrected basis adjusts that denominator for the measured water content. An HPLC peak-area percentage describes chromatographic purity under its test conditions and does not automatically give the mass percentage of amifostine. The specification states the method, reference standard and calculation basis used for acceptance.
Assay, impurities and quality guarantee
Supply quality is guaranteed to meet the chemical form, grade and specification agreed for the order. The quality requirements cover identity, assay, water content and related substances, with residual-solvent limits matched to the manufacturing route. Any required pharmacopoeial standard is identified with its applicable edition and material form; acceptance covers the applicable monograph requirements as a whole, rather than only a purity percentage.
WR-1065 is the distinct thiol formed by dephosphorylation of amifostine and can also arise during degradation. It is not a synonym or replacement for WR-2721. Appropriate HPLC procedures can measure amifostine and monitor WR-1065 and other related substances. Sample preparation, solution holding conditions and test timing matter because degradation during analysis can alter the reported profile.
Related formulation and process materials
Niacinamide (nicotinamide) has been used as a stabilizer and povidone (PVP) as an excipient in specific amorphous amifostine formulation studies. Their suitability for formulation procurement depends on the excipient grade and validated formulation.
Upstream process procurement is separate from formulation ingredients. Tetrahydrofuran (THF) and N,N-dimethylformamide (DMF) are solvents used in reported amifostine synthesis routes. They are selected for the relevant process stage, with solvent quality and residual-solvent controls set for that process. These materials are not substitutes for amifostine or ingredients presumed to be present in the supplied powder.
Documents, handling and quotations
We can provide a Certificate of Analysis (COA), Technical Data Sheet (TDS) and Safety Data Sheet (SDS) for the quoted product, together with applicable HPLC chromatograms and identity, related-substance, water-content and residual-solvent test data. The technical package supports assessment against the agreed raw-material specification; any additional regulated-use documentation is specified with the offered grade.
Packaging protects the powder from light and moisture and remains tightly closed. Pack size, storage temperature and transport conditions are stated for the quoted form and its stability information. For a quotation, send the required form or specification, quantity and destination; include any applicable pharmacopoeial or handling requirements.
FAQ - Technical & Supply Chain
-
Q:
Are amifostine and amifostine trihydrate the same form?
A: They share the amifostine parent compound but differ in hydration state. CAS 20537-88-6 corresponds to the anhydrous identity, molecular weight 214.22 g/mol. The trihydrate, CAS 112901-68-5, has molecular weight 268.27 g/mol. The order specifies the required form and the basis on which content is reported. -
Q:
Does an HPLC purity percentage mean the same as amifostine content?
A: Not automatically. HPLC peak-area purity, a quantitative assay and an as-is or water-corrected content result are different reporting measures. The agreed specification identifies the method, reference standard and calculation basis so that the result can be compared with the correct acceptance limit. -
Q:
Is WR-1065 another name for WR-2721?
A: No. WR-2721 is amifostine, while WR-1065 is its distinct dephosphorylated thiol. WR-1065 can be monitored as a degradation-related substance using an appropriate analytical method; it must not be substituted for amifostine in procurement. -
Q:
How are amifostine packaging and storage conditions specified?
A: Packaging protects the powder from light and moisture. Pack size and the specified storage and transport conditions depend on the supplied hydration and solid-state form, storage period and supporting stability information. Our quotation states the applicable conditions for that material. -
Q:
What is needed for an amifostine raw-material quotation?
A: Send the required chemical form or specification, quantity and destination. Assay basis, impurity limits and any applicable pharmacopoeial requirement help define the offered grade. The quotation sets out the quality commitment, packaging and handling conditions for that material.
Ordering & Documentation
Key information for document requests, quotations, and supply planning.
Documents
Tell us which documents your procurement team needs. Before an order, we will check whether the quoted source can provide them for the offered lot.
Quotation
Send the CAS number, grade, quantity, packing preference and destination.
Sample & Supply
Ask whether samples, trial quantities or repeat orders are possible. We will check each request against the sourced product and current offer.
Storage & Shipping
Product-specific conditions are confirmed before order.




