Potassium Iodide (KI), CAS 7681-11-0, is a readily water-soluble iodide salt for industrial processing and analytical use. Key applications include PA6/PA66 heat-stabilizer systems and iodine/PVA polarizing-film processing. Grade selection depends on assay basis, impurity limits and the required particle form.
Potassium Iodide (KI) CAS 7681-11-0
- CAS: 7681-11-0
- Synonyms: Potassium iodide; KI
- Einecs: 231-659-4
- Molecular Formula: KI
- Grade: Technical and reagent grades; assay basis and impurity limits specified in the quotation
- Package: Sealed, light- and moisture-protected packaging; pack size agreed with the quotation
Product Description
Potassium iodide is supplied as a white crystalline solid. For the pure solid, reference values include a molar mass of 166.00 g/mol, a melting point of about 680–681 °C and a density of 3.13 g/cm³ at 20 °C. These are reference properties, not batch assay results or bulk-density specifications.
In PA6 and PA66, KI is used together with cuprous iodide in heat-stabilizer systems. Particle size, flow and dispersibility matter when selecting material for polymer compounding; the combination and dosage depend on the formulation.
KI is also used in iodine-based polyvinyl alcohol (PVA) polarizing-film processing. KI concentration, the selected PVA grade and process conditions must be matched to the intended film process.
KI assay commonly uses titration, including argentometric methods with silver nitrate. The specification should state the test method and whether the result is reported as-is or on a dry basis.
In iodometry, KI is used to generate or dissolve iodine as required by the test method. Anhydrous sodium thiosulfate is used to prepare titrant solutions that require standardization; the solid is not a ready-to-use volumetric solution.
Light and moisture protection help limit discoloration and iodine formation during storage. We can provide COA, TDS, SDS and applicable test data for the quoted grade. For a quotation, send the intended application, required grade or key limits, quantity and destination.

FAQ - Technical & Supply Chain
-
Q:
Are Potassium Iodide and KI the same material?
A: Yes. KI is the chemical formula for potassium iodide, CAS 7681-11-0. Potassium iodate, iodine and potassium bromide are different substances and are not interchangeable with KI. Specify the required solid form, or the concentration when ordering an aqueous solution. -
Q:
Which quality limits matter when ordering Potassium Iodide?
A: Agree the KI assay method and reporting basis, iodate or free-iodine limits, and the impurities relevant to the process, such as chloride/bromide, sulfate, insoluble matter or metals. Loss on drying should include its test temperature and time; it is not automatically a water-specific result. For polymer use, particle form and dispersibility also matter. Food or pharmaceutical orders require the applicable grade and standard to be specified.
Ordering & Documentation
Key information for document requests, quotations, and supply planning.
Documents
Tell us which documents your procurement team needs. Before an order, we will check whether the quoted source can provide them for the offered lot.
Quotation
Send the CAS number, grade, quantity, packing preference and destination.
Sample & Supply
Ask whether samples, trial quantities or repeat orders are possible. We will check each request against the sourced product and current offer.
Storage & Shipping
Product-specific conditions are confirmed before order.



