Chemical products

Alpha Cypermethrin CAS 67375-30-8

Alpha-Cypermethrin (CAS 67375-30-8) is a pyrethroid active supplied as 95% technical material (TC) for professional insecticide formulation. The white to cream-coloured crystalline powder is available for bulk orders with COA/TDS/SDS and GC-FID quality data.

  • CAS: 67375-30-8
  • Synonyms: Alphacypermethrin; α-cypermethrin; alphamethrin (literature synonym)
  • Molecular Formula: C₂₂H₁₉Cl₂NO₃
  • Grade: 95% TC; alpha-cypermethrin content ≥950 g/kg (95.0% w/w)
  • Package: 25 kg lined fibre drums; other compatible lined drums by agreement
  • EC/List number: 614-054-3
  • Molecular weight: 416.30 g/mol
Request a quote
Share:

Product Description

Identity and 95% TC specification

Alpha-cypermethrin is the racemate of a defined cis enantiomer pair of cypermethrin. It is distinct from the wider stereoisomer mixture sold as generic cypermethrin. The EC/List number is 614-054-3.

For the quoted 95% TC grade, alpha-cypermethrin content is guaranteed at a minimum of 950 g/kg (95.0% w/w), against the product specification and analytical method agreed in the quotation.

Active content is determined by calibrated capillary GC-FID using an agreed method based on CIPAC 454. The reported mass fraction refers to alpha-cypermethrin, rather than the sum of all cypermethrin-isomer peaks or an uncalibrated GC peak-area percentage.

The specification can also cover related isomers, water, relevant process impurities and residual solvents. The alpha enantiomer pair produces one peak in conventional achiral GC; separate measurement of each enantiomer requires a suitable validated stereoselective method.

Formulation uses and related raw materials

The technical powder is supplied for professional manufacture of crop-protection and public-health insecticides, including emulsifiable concentrates (EC), suspension concentrates (SC) and capsule suspensions (CS). Finished-product uses follow the applicable registration and label.

For EC development, Castor Oil Ethoxylate EL-40 and Tristyrylphenol Ethoxylate 603 are emulsifier candidates. The grade and emulsifier blend are selected for the intended formulation, with dilution and storage stability evaluated in that system.

In selected water-based formulations, Propylene Glycol can serve as an antifreeze co-formulant. Its level and compatibility depend on the finished formulation.

Alpha-cypermethrin has very low water solubility. Cyclohexanone is one documented organic-solvent option for dissolution trials. Solvent selection also depends on dilution and storage stability; dissolution alone does not establish compatibility with a capsule-suspension formulation.

Bulk supply and quality documents

25 kg lined fibre drums are available. Compatible lined steel-drum options and other net weights can be agreed for the order, with the packing and shipment requirements included in the quotation.

We can provide a Certificate of Analysis (COA), Technical Data Sheet (TDS), Safety Data Sheet (SDS), and relevant GC-FID assay data and chromatograms for the quoted grade. Analytical methods and acceptance limits are matched to the agreed product specification.

Keep containers tightly closed in a cool, dry, well-ventilated and secure area, away from heat, direct sunlight, food, feed and incompatible materials. The supplied-grade SDS sets out storage conditions, dust control and personal protection.

Request a bulk quotation with the required grade, quantity and destination. Add packaging preferences or specific analytical requirements where relevant.

FAQ - Technical & Supply Chain

  • Q:

    How does alpha-cypermethrin differ from cypermethrin?

    A: Alpha-cypermethrin, CAS 67375-30-8, is the racemate of a defined cis enantiomer pair. Generic cypermethrin contains a wider stereoisomer mixture. Identity and assay therefore refer to alpha-cypermethrin, rather than total cypermethrin.
  • Q:

    How is the 95% TC grade assayed?

    A: The quoted grade contains at least 950 g/kg alpha-cypermethrin (95.0% w/w), determined by a calibrated GC-FID assay under the agreed method. An uncalibrated GC peak-area percentage is not the same result basis; conventional achiral GC does not separately quantify the two enantiomers.
  • Q:

    Is this technical material ready for direct application?

    A: No. It is concentrated technical material for qualified formulators. Finished crop-protection and public-health products need suitable formulation and the applicable registration and label.
  • Q:

    Which documents and quality data can you provide?

    A: We can provide COA, TDS, SDS and relevant GC-FID assay data and chromatograms. The quotation can also define acceptance limits and methods for related isomers, water, applicable impurities and residual solvents.
  • Q:

    What packaging is available for bulk orders?

    A: 25 kg lined fibre drums are available. Compatible lined steel drums and other net weights can be agreed for the order. Include the quantity and destination in the quotation request.
  • Q:

    How should alpha-cypermethrin TC be stored?

    A: Keep containers tightly closed in a cool, dry, well-ventilated and secure area, away from heat, direct sunlight, food, feed and incompatible materials. Follow the supplied-grade SDS for storage conditions, dust control and personal protection.

Ordering & Documentation

Key information for document requests, quotations, and supply planning.

Documents

Tell us which documents your procurement team needs. Before an order, we will check whether the quoted source can provide them for the offered lot.

Quotation

Send the CAS number, grade, quantity, packing preference and destination.

Sample & Supply

Ask whether samples, trial quantities or repeat orders are possible. We will check each request against the sourced product and current offer.

Storage & Shipping

Product-specific conditions are confirmed before order.

Contact Form

Use our contact form to send us your questions, suggestions or comments. We will respond as soon as possible.
For a quotation, please include the product name or CAS number, quantity, grade or application, and destination country or port. Tell us if you need a sample, COA, TDS or SDS.