Chemical products

Dopamine Hydrochloride CAS 62-31-7

Dopamine Hydrochloride, CAS 62-31-7, is a white to off-white crystalline powder also known as 3-hydroxytyramine hydrochloride. This dopamine salt is supplied as a raw material for polydopamine coatings and surface modification. The quoted grade identifies the assay method, reporting basis and impurity limits for the application.

  • CAS: 62-31-7
  • Synonyms: Dopamine hydrochloride; 3-Hydroxytyramine hydrochloride; Dopamine HCl; 4-(2-aminoethyl)benzene-1,2-diol hydrochloride
  • Einecs: 200-527-8
  • Molecular Formula: C₈H₁₂ClNO₂
  • Grade: Assay method, reporting basis and impurity limits agreed for the coating-process or specified pharmaceutical grade.
  • Package: Fibre drums with sealed inner bags; net weight, storage temperature and transport conditions specified in the quotation.
Request a quote
Share:

Product Description

Dopamine hydrochloride identity and applications

Dopamine hydrochloride, dopamine HCl and 3-hydroxytyramine hydrochloride identify CAS 62-31-7. Its molecular formula is C₈H₁₂ClNO₂, also written as C₈H₁₁NO₂·HCl, with molecular weight 189.64 g/mol. It is a water-soluble crystalline powder. Dopamine free base is a different chemical form, CAS 51-61-6, with molecular weight 153.18 g/mol; the salt identity must match the order specification.

In surface treatment, dopamine hydrochloride is the precursor used to form polydopamine (PDA), rather than preformed PDA itself. Controlled oxidation and bath pH are part of the coating process. Pharmaceutical procurement is quoted against the named pharmacopoeial standard and required qualification package; a coating-process grade is not assumed to meet those requirements.

Assay, impurities and quality guarantee

HPLC peak-area purity reports the dopamine peak as a proportion of the integrated chromatographic profile under the stated method; it does not automatically give the mass content of dopamine hydrochloride. Titration and purity estimates based on total nitrogen use different analytical measurements. A quantitative assay must state its method and calculation basis, including whether the result is reported as-is or on a dried basis.

Supply quality is guaranteed to meet the dopamine hydrochloride identity, grade and specification agreed for the order. Acceptance limits cover assay or chromatographic purity, related substances and moisture or loss on drying, with residual-solvent or metal limits where required for the application. Each result uses its stated test method and reporting basis.

Related coating-process materials

Tris base (trometamol) is used to prepare pH-controlled buffer solutions for dopamine coating baths. It is not a ready-made Tris–HCl buffer. Polyethyleneimine (PEI) is an amine-rich co-deposition material in selected polydopamine coating systems; its molecular weight, structure and solids content need to match the formulation.

For coating systems that use additional amines, ethylenediamine is a small-molecule diamine and PEI is a polymeric amine; their coating behaviour is not interchangeable. Tannic acid provides a separate polyphenolic coating route for formulation comparison. It is chemically different from dopamine hydrochloride and is not a direct substitute.

Packaging, documents and quotations

We can provide a Certificate of Analysis (COA), Technical Data Sheet (TDS) and Safety Data Sheet (SDS) for the quoted product, together with applicable HPLC chromatograms and identity, related-substance, moisture and residual-solvent data. The document package identifies the analytical method and supports assessment against the agreed raw-material specification.

Fibre drums with sealed inner bags protect the powder during handling. Containers remain tightly closed and protected from light, air and moisture. Pack size and storage and transport temperatures are stated for the quoted grade and its stability requirements. For a quotation, send the required grade or specification, quantity and destination; include any applicable pharmacopoeial standard.

FAQ - Technical & Supply Chain

  • Q:

    Are dopamine hydrochloride and 3-hydroxytyramine hydrochloride the same material?

    A: Yes. Both identify dopamine hydrochloride, CAS 62-31-7, molecular weight 189.64 g/mol. Dopamine free base has a different CAS number, 51-61-6, and molecular weight 153.18 g/mol. The quotation and order specify the hydrochloride salt.
  • Q:

    Can a polydopamine coating grade be treated as a pharmaceutical grade?

    A: No. CAS 62-31-7 identifies the chemical, not a complete quality standard. Coating-process and pharmaceutical specifications can differ in assay, related substances and qualification requirements. The quotation identifies the grade and any named pharmacopoeial standard agreed for the order.
  • Q:

    Does HPLC purity mean the same as dopamine hydrochloride assay?

    A: Not automatically. HPLC peak-area purity is not automatically the mass content of dopamine hydrochloride. Titration and total-nitrogen measurements have their own calculation methods. A quantitative assay also states whether its result is reported as-is or on a dried basis, so that it can be compared with the corresponding acceptance limit.
  • Q:

    How is dopamine hydrochloride supply quality guaranteed?

    A: Supply is guaranteed against the identity, grade and specification agreed for the order, including the applicable assay and impurity limits. COA/TDS/SDS and relevant HPLC and other quality data can be provided to support assessment against that specification.
  • Q:

    What packaging and storage conditions apply to dopamine hydrochloride?

    A: Fibre drums with sealed inner bags are a suitable bulk-packaging format. Keep containers tightly closed and protected from light, air and moisture. Our quotation states the pack size and applicable storage and transport conditions for the supplied grade.

Ordering & Documentation

Key information for document requests, quotations, and supply planning.

Documents

Tell us which documents your procurement team needs. Before an order, we will check whether the quoted source can provide them for the offered lot.

Quotation

Send the CAS number, grade, quantity, packing preference and destination.

Sample & Supply

Ask whether samples, trial quantities or repeat orders are possible. We will check each request against the sourced product and current offer.

Storage & Shipping

Product-specific conditions are confirmed before order.

Contact Form

Use our contact form to send us your questions, suggestions or comments. We will respond as soon as possible.
For a quotation, please include the product name or CAS number, quantity, grade or application, and destination country or port. Tell us if you need a sample, COA, TDS or SDS.