Barium Hydroxide Monohydrate, CAS 22326-55-2, is a white crystalline inorganic base used in barium-salt production, barium-soap lubricants and industrial sulfate-control processes. Its formula is Ba(OH)₂·H₂O. Hydroxide assay, carbonate content and the reporting basis help distinguish grades for a particular process.
Barium Hydroxide Monohydrate CAS 22326-55-2
- CAS: 22326-55-2
- Synonyms: Barium hydroxide monohydrate; Barium dihydroxide monohydrate
- Molecular Formula: Ba(OH)₂·H₂O
- Grade: Monohydrate grades with agreed hydroxide assay, carbonate and impurity limits
- Package: Sealed packaging protected from moisture and carbon dioxide; pack type and net weight stated in the quotation
- ECHA List number: 606-983-8
Product Description
Monohydrate identity and hydrate comparison
Barium hydroxide monohydrate has the formula Ba(OH)₂·H₂O and a molar mass of about 189.36 g/mol. Its ECHA List number is 606-983-8. The solid is supplied as powder or crystalline material, depending on the grade. Its dissolved portion forms a strongly alkaline solution.
Barium hydroxide octahydrate contains eight waters of crystallization per formula unit, whereas the monohydrate contains one. The forms differ in formula mass and the water they introduce into a process. Equal weights do not provide the same amount of Ba(OH)₂; a change of hydrate requires adjustment on a common hydroxide-content basis and review of the process water balance.
Assay, carbonate and water-related results
Acid–base titration can determine hydroxide assay, with the carbonate contribution accounted for in the method. A percentage reported as Ba(OH)₂ is different from one expressed as Ba(OH)₂·H₂O. Results also depend on whether they are reported on an as-supplied or dry basis. The specification and COA identify the calculation basis and agreed carbonate and impurity limits.
Water content and heating loss are different measurements. The method and test conditions matter because the material contains water of crystallization as well as possible free moisture. Heating loss must not automatically be treated as free moisture. Water determination requires a method suitable for the hydroxide matrix; routine direct Karl Fischer titration can be affected by side reactions.
Industrial uses and related materials
Barium hydroxide monohydrate is used to prepare barium salts and barium soaps and to control sulfate in selected industrial process streams. Grade selection depends on the required hydroxide content, carbonate and impurities.
In barium-soap grease manufacture, stearic acid and 12-hydroxystearic acid (12-HSA) are relevant fatty-acid reactants. Their acid value and functionality influence the reaction and soap structure. They have different formulation roles from barium hydroxide and are not direct substitutes for it.
Reaction with sulfate produces insoluble barium sulfate. The precipitate and commercial barium sulfate fillers are chemically distinct from the hydroxide: a sulfate filler does not replace the hydroxide’s alkaline function or its role as a reactive barium source.
Quality documents and bulk quotation
We can provide a Certificate of Analysis (COA), Technical Data Sheet (TDS) and Safety Data Sheet (SDS) for the quoted grade, together with assay, carbonate and agreed impurity test information. Water or heating-loss data include the method and test conditions. Hydrate-identity information, such as X-ray diffraction data, can be provided where required for the application.
For a quotation, send the quantity, intended application and destination. Add the required assay basis, carbonate limit, other impurity limits and preferred pack size if already defined. Detailed technical requirements can be discussed after the initial enquiry.
Packaging, storage and handling
Keep the packaging tightly closed, dry and protected from carbon dioxide. Air exposure can convert hydroxide to barium carbonate. Control dust during transfer and use the protective equipment specified in the SDS and workplace assessment. The SDS for the quoted grade and destination provides the applicable hazard, incompatibility and transport information.


FAQ - Technical & Supply Chain
-
Q:
What is Barium Hydroxide Monohydrate CAS 22326-55-2?
A: It is the monohydrate Ba(OH)₂·H₂O, also called barium dihydroxide monohydrate. Its molar mass is about 189.36 g/mol and ECHA List number is 606-983-8. It is distinct from anhydrous barium hydroxide and barium hydroxide octahydrate. -
Q:
Can monohydrate replace barium hydroxide octahydrate?
A: The forms supply the same parent hydroxide but contain different amounts of water of crystallization. Equal weights are not equivalent. A change requires comparison on the same hydroxide-content and assay basis, adjustment of dosage and review of the process water balance. -
Q:
Which quality results matter when comparing monohydrate grades?
A: Compare hydroxide assay and its calculation basis, carbonate content and application-specific impurity limits. Acid–base titration is suitable for assay when carbonate is accounted for. Water and heating-loss results need the method and test conditions and cannot automatically be read as free moisture. -
Q:
Which documents and test information can you provide?
A: We can provide COA, TDS and SDS for the quoted grade, with assay, carbonate and agreed impurity test information. Water or heating-loss data state the test conditions. X-ray diffraction information can be provided when hydrate identity requires it. -
Q:
What information is needed for a bulk quotation?
A: Send the quantity, intended application and destination. Include any defined assay basis, carbonate or impurity limits and packing preference. We can match the specification and packaging to the enquiry; a complete technical specification is not required for the first contact.
Ordering & Documentation
Key information for document requests, quotations, and supply planning.
Documents
Tell us which documents your procurement team needs. Before an order, we will check whether the quoted source can provide them for the offered lot.
Quotation
Send the CAS number, grade, quantity, packing preference and destination.
Sample & Supply
Ask whether samples, trial quantities or repeat orders are possible. We will check each request against the sourced product and current offer.
Storage & Shipping
Product-specific conditions are confirmed before order.



