Chemical products

Cobalt(II) Sulfate Heptahydrate CAS 10026-24-1

Cobalt(II) sulfate heptahydrate, CAS 10026-24-1, is a water-soluble cobalt salt used in electroplating and cobalt-compound manufacture. Commercial grades differ in cobalt content, metal impurities and crystalline form; battery-material precursor applications require an agreed impurity specification.

  • CAS: 10026-24-1
  • Synonyms: Cobalt(II) sulfate heptahydrate; Cobaltous sulfate heptahydrate; Cobalt sulfate heptahydrate
  • Einecs: 233-334-2
  • Molecular Formula: CoSO₄·7H₂O
  • Grade: Industrial applications; specification by quotation
  • Package: Packaging format and net weight by quotation
Request a quote
Share:

Product Description

Cobalt(II) sulfate heptahydrate has the formula CoSO₄·7H₂O and is typically a pink to red crystalline solid. It provides cobalt for electroplating and cobalt-compound or catalyst-precursor manufacture. Battery-material precursor processing requires a specification suited to that route. The hydrate state affects formula weight and cobalt content, so anhydrous and other hydrated cobalt sulfates are not equal-weight substitutes.

Cobalt(II) Sulfate Heptahydrate CAS 10026-24-1

Cobalt mass fraction, assay expressed as CoSO₄·7H₂O and purity on a metals basis measure different quantities. Relevant controls include nickel, iron, copper and zinc impurities, chloride and water-insoluble matter. ICP-OES may be used for cobalt and trace-metal measurements, while validated titration methods may determine cobalt content or assay expressed as the heptahydrate. Reports need the method, units and result basis. Any moisture or loss-on-drying requirement must distinguish free moisture from crystal water and specify the test conditions.

For cobalt-precursor routes requiring a different counter-ion, compare cobalt(II) nitrate hexahydrate. Cobalt(II) chloride hexahydrate is relevant to specified sulfate–chloride plating baths. In nickel–cobalt formulations, nickel(II) chloride dihydrate is a nickel/chloride raw-material option only after checking hydrate-specific dosing and bath compatibility. Boric acid serves as a buffering additive where the bath formulation includes it. These products are related process materials, not direct substitutes for cobalt sulfate heptahydrate.

We can provide a Certificate of Analysis (COA), Technical Data Sheet (TDS), Safety Data Sheet (SDS) and the agreed cobalt or trace-metal analysis information. For a bulk quotation, send the intended process, required cobalt content and impurity limits, quantity and destination. The specification, crystalline form and packaging are agreed in the quotation.

FAQ - Technical & Supply Chain

  • Q:

    Is Cobalt(II) Sulfate Heptahydrate interchangeable with anhydrous Cobalt Sulfate?

    A: No. CAS 10026-24-1 identifies CoSO₄·7H₂O. Anhydrous and other hydrated cobalt sulfates have different formula weights and cobalt mass fractions. Compare the hydrate identity, assay basis and delivered cobalt content; the same mass of a different hydrate does not deliver the same amount of cobalt.
  • Q:

    Which specifications should be agreed for Cobalt Sulfate Heptahydrate?

    A: Specify whether the percentage means cobalt content or assay expressed as CoSO₄·7H₂O, together with the analytical method and reporting basis. Set application-relevant impurity limits, including metals, chloride and insoluble matter. If moisture or loss on drying is required, define the water fraction and test conditions. Crystalline form and dissolution requirements should suit the intended process.

Ordering & Documentation

Key information for document requests, quotations, and supply planning.

Documents

Tell us which documents your procurement team needs. Before an order, we will check whether the quoted source can provide them for the offered lot.

Quotation

Send the CAS number, grade, quantity, packing preference and destination.

Sample & Supply

Ask whether samples, trial quantities or repeat orders are possible. We will check each request against the sourced product and current offer.

Storage & Shipping

Product-specific conditions are confirmed before order.

Contact Form

Use our contact form to send us your questions, suggestions or comments. We will respond as soon as possible.
For a quotation, please include the product name or CAS number, quantity, grade or application, and destination country or port. Tell us if you need a sample, COA, TDS or SDS.